Search

The ER11 Chuck spindle motor shaft extension rod spindle collet is a versatile and essential tool for your electronic projects. Whether you are working on a hobby project or a professional job, this extension rod will help you connect different components efficiently. It has a 5mm/8mm collet size, m..

Description:This OLED display module is small, only 0.96″ diagonal, it is made of 128×64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you wi..

Description:This OLED display module is small, only 0.96″ diagonal, it is made of 128×64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you wi..

An I2C adapter for 1604 (16x4 character) LCD screens is a small interface board using a PCF8574 chip. It cuts down the wires needed from 10 or more down to just 4. It works with 5V power and connects via two data lines (SDA and SCL).Main FeaturesUses only two microcontroller pins for data communica..

is_customized : Yes Model Number : MCP2515 Dissipation Power : 1 Supply Voltage : 1 Application : Computer Condition : New Type : Voltage Regulator Brand Name : MXW Origin : Mainland ChinaDESCRIPTION:Support CAN V2.0 B , Communication rate up to 1Mb/SPower supply: DC 5V , SPI Protocol ControlWork c..

Package Included:1 x MH-ET LIVE BMI160 GY-BMI160 6DOF 6-axis Rate Gyro Gravity Accelerometer Sensor Module IIC I2C SPI Communication Protocol 3-5V..

Features:Support Micro SD Card, Micro SDHC card (high-speed card)The level conversion circuit board that can interface level is 5V or 3.3VCommunication interface is a standard SPI interfaceControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,VCC is the power supply,..

The Micro SD SDHC TF Card Adapter Module is a compact breakout board that lets microcontrollers like Arduino or Raspberry Pi read and write to Micro SD and Micro SDHC memory cards via a standard SPI communication bus.Key FeaturesCard Support: Works with Micro SD (<2GB) and Micro SDHC (<32GB)..

MPU-6500 Module (Triaxial Gyroscope + Triaxial Accelerometer)Module Model: GY-6500Chip Used: MPU-6500Power Supply: 3-5V (Internal Low Dropout Regulator)Communication: Standard IIC/SPI Communication Protocol- 16-bit ADC, 16-bit Data OutputGyroscope Range: ±250, 500, 1000, 2000°/sAcceleration Range: ..

Material: PE polyethyleneFeatures: Wear and corrosion resistance, high temperature resistance.Uses: computer case harness, machine tool/wire harness..

Provide two-way communication capabilities,OE active high enable IO recommended by a low voltage side of the IO port.Supply voltage VA:1.2V to 3.6V - VB: 1.65V to 5.5V.Allows the use of 5V modules on 3.3V microcontrollers, or 3.3V modules on 5V microcontrollers.Supports SCM, I²C, SPI.Widely used in ..