Search

Description:1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;3. Support automatic probe tool4. Support Emergency input5. Support for limit switch6. Support for connect..

Product parameters:Size: 33.4 * 25.6MMVoltage: 3.3V, 5VPort: the digital quantity levelThe output load voltage: 0 to 24VThe output load current: < 5A (more than 1A need to add heat sink)Platform:  MCU, ARM,The product features:Using original IRF520 power MOS tube, can adjust PWM outputCan l..

DescriptionParameters:1.Item: ID keychain2. Material: ABS3.Size:approx. 43.7 x 30.5 x 5.3mm4. Response Frequency:125 KHz5. Chip Type: TK4100/EM41006. Erase Life: 100000 (times)7. Sensing Distance: 0-5 (cm)8. Read Time: 0.2 (MS)9. Operating Temperature: -40 ℃ - 85 ℃, waterproof10. Color: Mixed Color..

Description:100% brand new and high qualityMaterial: Electrical ComponentsColor: See picturesFeatures:You want to make a robot, When we saw this chip, we quickly realized what an excellent add-on this would be.Using only two pins, control 16 free-running PWM outputs!I2C input, control 16 PWM output..

Product Parameters: Operating Voltage: 3.3V-5V, Communication Mode: IIC, Measuring Distance: Off (Reset)/GPIO Interrupt: 2mm. Product Overview: The VL53L0X laser rangefinder is a next-generation laser rangefinder module. Fully integrated, it integrates an infrared sensor, an eye-safe laser, advanced..

An I2C adapter for 1604 (16x4 character) LCD screens is a small interface board using a PCF8574 chip. It cuts down the wires needed from 10 or more down to just 4. It works with 5V power and connects via two data lines (SDA and SCL).Main FeaturesUses only two microcontroller pins for data communica..

Upgraded Version of  Starter Kit  RFID Stepper Motor Learning Kits   Description:RFID Learning Suite is the entry to the master suite upgrades, updates place mainly in: 1.1602 I2C 1602 replaced the screen to control it more convenient,2.New RFID module and RFID keychain and ..

Features:Support Micro SD Card, Micro SDHC card (high-speed card)The level conversion circuit board that can interface level is 5V or 3.3VCommunication interface is a standard SPI interfaceControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,VCC is the power supply,..

The Micro SD SDHC TF Card Adapter Module is a compact breakout board that lets microcontrollers like Arduino or Raspberry Pi read and write to Micro SD and Micro SDHC memory cards via a standard SPI communication bus.Key FeaturesCard Support: Works with Micro SD (<2GB) and Micro SDHC (<32GB)..

DescriptionUp for sale is a MELEXIS MLX90614ESF-BAA-000-TU-ND non-contact infrared thermometer for Arduino, or any microcontroller that can communicate with it through it's I2C interface. This sensor comes with a breakout board with all of the components needed for operation and two types ..

Upgraded Version of  Starter Kit  RFID Stepper Motor Learning Kits   Description:RFID Learning Suite is the entry to the master suite upgrades, updates place mainly in: 1.1602 I2C 1602 replaced the screen to control it more convenient,2.New RFID module and RFID keychain and ..