Special Offers

Description:This OLED display module is small, only 0.96″ diagonal, it is made of 128×64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you wi..

Description:This OLED display module is small, only 0.96″ diagonal, it is made of 128×64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you wi..

Description:100% brand new and high qualityMaterial: Electrical ComponentsColor: See picturesFeatures:You want to make a robot, When we saw this chip, we quickly realized what an excellent add-on this would be.Using only two pins, control 16 free-running PWM outputs!I2C input, control 16 PWM output..

This is a popular 16×2 LCD Display Blue/Green LED Backlight display. It is based on the HD 44870 display controller which makes it is easy to interface this LCD most micro-controllers. Its extreme popularity ensures that no matter which micro controller platform you are using, you will definitely fi..

This is a popular 16×2 LCD Display Blue/Green LED Backlight display. It is based on the HD 44870 display controller which makes it is easy to interface this LCD most micro-controllers. Its extreme popularity ensures that no matter which micro controller platform you are using, you will definitely fi..

This is the combo of 20CM Wire Color Jumper Cable, 2.54mm 1P-1P M-M, M-F, F-F 4m10PCS of wire in each strip of cable. It is very Flexible and easily detachable to no. of wires to your requirement. It is compatible with 2.54 mm mil spacing pin headers.This 20CM Dupont Wire Color Jumper Cable is an e..

TTL to RS485 485 to Serial UART Adapter Compatible with 3.3V and 5.0V power supply. Has RXD, TXD signal indicator light, monitor send and receive status. Support multi-machine communication, allowing access at up to 128 devices on the bus The module can be hot swapped, the signal does not ap..

Specifications:Une carte adaptateur d’extension GPIO rouge(Ne comprend pas la planche à barbe 400 Points)Câble ruban plat 26 broches 2.54-picth 200mm100% neufConnecteur: connecteurs IDC femellesBroches: 26Pas: 2.54mmLongueur: environ 200mmIdéal pour connecter RPi à une autre carte d’application (tel..

3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield is an all-in-one design to fit the necessary components for a 3D printer into one plug in shield for an Arduino MEGA.The plug in shield design includes plug in stepper drivers and extruder control electronics sockets for easy service, part re..

Description3 strings of 12.6V 20A lithium battery protection boardScope of application: Lithium batteries with nominal voltages of 3.6V and 3.7V (including 18650, 26650, and polymer lithium batteries)Product size: 59 * 20 * 3.4mmProduct weight: 4.3gCharging voltage: 12.6V-13.0VContinuous discharge..