Sensors

RFID Reader/Writer MFRC-522 RC522 with Card and Tag includes a 13.56MHz RF reader cum writer module that uses an RC522 IC and two S50 RFID cards. The MF RC522 is a highly integrated transmission module for contact-less communication at 13.56 MHz. RC522 supports ISO 14443A/MIFARE mode. This is RFID ..

The DS1302 is a trickle charge clock chip from DALLAS that contains a real-time clock / calendar and 31 bytes of static RAM to communicate with the microcontroller through a simple serial interface. Real-time clock / calendar circuit provides seconds, minutes, hours, days, weeks, months, years of i..

Specifications:Color: WhiteAlarm Diameter: 29mm / 1.14"Alarm Height: 15mm / 0.59"2 Mounting Holes distance: 40mm / 1.57"2 Wires length: 105mm / 4.13"Rated Voltage: 12VOperating Voltage: 3-24VRated Current(MAX): 20mAMin Sound Output at 10 cm: 95 DBResonant Frequency: 3100±500Operating Temperature: -..

????️ Short Distance Scan Sensor Sweep Hand Sensor Switch Module 36W3AThe 36W3A Short Distance Scan Sensor Module is a compact, high-sensitivity infrared hand sweep sensor designed for non-contact switching applications. It detects hand motion within a short range and triggers an output signal—perfe..

GY-PCM5102 I2S IIS DAC Decoder Board, Lossless Digital-to-Analog Converter for Raspberry Pi/Microcontroller???? Why Do Audio Makers Choose This DAC Decoder Board?1. Professional Lossless Decoding, Clear and Delicate Sound QualityEquipped with TI PCM5102 core chip, it supports up to 24bit/192kHz samp..

Through the potentiometer to adjust the soil moisture control threshold, can automatically on the garden, Garden automatic watering, home flowerpot soil moisture control, various electronic games, electronic building blocks, arduino design.Product introduction:1. The use of the company’s production ..

SRF05 Ultrasonic Module FeaturesSRF05 is an ultrasonic transmitter and receiver module used to measure distance. The sensor operation is very simple. You only need to measure the return time of ultrasonic waves in order to measure the distance. Then you should divide measured time by 2 and multiply ..

Feature: On-board DIP switch, you can easily adjust the drive segments Terminal power connector for easy connection drive power Compatible with 12 / 24V drive scheme Suitable for 42 stepper motor drive, 3D printers and DIY Specification: Size: 42 x 42 x 15mm Fixed: 3mm Pitch: 1400 x 1400mil (35.56 ..

Product DetailsConnector Type: 20-pinCompatible Device: PCFormat: Mini-ITXCertification: 80 Plus BronzePower Supply: Battery-freeBattery: No batteryPart Number: PG5007571Origin: Guangdong, ChinaProduct Overview: The INMP441 is a high-performance, low-power, omnidirectional MEMS microphone with a dig..

TDS (Total Dissolved Solids) Sensor Module - Analog Signal - Water Quality Detection - DS18B20 - Temperature - Arduino 51/STM32 CompatibleProduct Overview:TDS, also known as Total Dissolved Solids, indicates the amount of dissolved solids (in milligrams) in one liter of water. The higher the TDS va..

100% brand new and high qualityCharge module:Linear charging.Current:1A adjustable.Charge precision:1.5%.Input voltage:4.5V-5.5V.Full charge voltage:4.2V ± 1%Led indicator:red is charging Green is full charged.Input interface:micro USB/mini usb/type-c usbWork temperature:-10° to +85°.Inversed polari..