Sensors
Brand: SLYPRO
Model: INO-000134
Feature:With signal output instructionsTTL output signal is low level0~5v analog voltage output, the higher the concentration, the higher the voltageColor is displayed as picture.PLS NOTE that due to lighting effects, monitor's brightness/contrast settings etc, there could be some slight differences..
850.00DA
Brand: SLYPRO
Model: INO-000128
Product Overview:Sensitive material MQ- 4 gas sensors used in clean air, low conductivity tin oxide (SnO2). When there is an environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Use simple circuit can convert the ch..
850.00DA
Brand: SLYPRO
Model: INO-000129
Product description:Sensitive material of MQ-5 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensors conductivity is more higher along with the gas concentration rising. Please use simple electrocircuit, convert change of conductivity to c..
850.00DA
Brand: SLYPRO
Model: INO-000130
DESCRIPTIONThe MQ-6 module is used in gas leakage detecting equipment in family and industry, This module has high sensitivity to LPG, iso-butane, propane and LNG. It can also be used to detect the presence of alcohol, cooking fumes, and cigarette smoke.The module gives out the concentration of the ..
850.00DA
Brand: SLYPRO
Model: INO-000132
DESCRIPTIONThe MQ8 hydrogen sensor is designed to measure the concentration of hydrogen in the air, with a measurement range of 100 to 10,000ppm (parts per million).This sensor works as a variable resistor that changes its value depending on the concentration of hydrogen gas present in the ambient a..
850.00DA
Brand: SLYPRO
Model: INO-000125
Module including an MQ2 sensor allowing the detection of several types of gas: LPG, Isobutane (C4H10), propane (C3H8), methane (CH4), hydrogen (H2), alcohol and smoke. This module is Arduino and Raspberry Pi compatible via an analog or digital output...
650.00DA
Brand: SLYPRO
Model: INO-000153
FeaturesTwo selectable differential input channelsOn-chip low-noise active PGA with selectable gain of 3264 and 128On-chip power regulator for load cell and analog ADC power supplyOn-chip oscillator requiring no external components with optional external crystalOn-chip power-up and resetSimple digit..
2,800.00DA
Brand: SLYPRO
Model: INO-000152
Application:GPS navigation enhancementFor example, correction time improvement, dead reckoning, slope detectionIndoor navigation (floor detection, elevator detection)Navigation, leisure, and outdoor sports applicationsWeather forecastingHealthcare applications (e.g., sirometry)Vertical speed indicat..
650.00DA 950.00DA
Brand: SLYPRO
Model: INO-000139
DescriptionWaterproof Ultrasonic Module JSN-SR04T / AJ-SR04M Water Proof Integrated Distance Measuring Transducer Sensor for ArduinoProduct introduction:The new version of SR04M recently released solves the problem of blind data jumps and improves the stability of the product. JSN-SR04T / AJ-SR..
1,550.00DA
Brand: SLYPRO
Model: INO-000126
The MQ3 alcohol sensor is simple to use and has two different outputs. It provides not only a binary indication of the presence of alcohol, but also an analog representation of its concentration in the air. The analog output voltage of the sensor (at pin A0) varies proportionally to the alcohol conc..
650.00DA
Brand: SLYPRO
Model: INO-000141
Features:
Heating voltage: 5 ± 0.2V (AC · DC)
Working current: 5-10mA
Detectable concentration range: PH0-14
Detection Temperature range: 0-80 ℃
Response time: ≤5S
Settling Time: ≤60S
Component Power: ≤0.5W
Working temperature: -10 ~ 50 ℃ (nominal temperature 20 ℃)
Humidity: 95% RH (nomina..
7,500.00DA
Brand: SLYPRO
Model: INO-000124
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that requires only one data line and ground for communication. It can be p..
650.00DA